[linux-tr] Recommendation sought:

[Karl Buck <kb@colltech.com>]

Hi folks. I'm new to linux-tr, and would appreciate a quick
recommendation on which software/patches to install beyond what I
already have (see below). 

I'm running pcmcia-3.0.10 with the 2.2.9 kernel using an IBM Turbo 16/4
pcmcia card in a Dell Inspiron 7000. 

Many thanks! --Karl

Linux PCMCIA Card Services 3.0.10
  kernel build: 2.2.9 #3 Sun May 16 00:35:27 CDT 1999
  options:  [pci] [cardbus] [apm]
Intel PCIC probe:
  TI 1220 PCI-to-CardBus at bus 0 slot 4, mem 0x68000000, 2 sockets
    host opts [0]: [pwr save] [serial pci & irq] [no pci irq] [lat
168/176] [bus
 32/34]
    host opts [1]: [pwr save] [serial pci & irq] [no pci irq] [lat
168/176] [bus
 35/37]
    ISA irqs (scanned) = 3,4,7,9,10 status change on irq 10
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
ibmtr.c: v1.3.57   8/ 7/94 Peter De Schrijver and Mark Swanson
         v2.1.125 10/20/98 Paul Norton <pnorton@ieee.org>
         v2.2.0   12/30/98 Joel Sloan <jjs@c-me.com>
tr0: ISA P&P 16/4 Adapter/A (short) | 16/4 ISA-16 Adapter found
tr0: using irq 0, PIOaddr a20, 16K shared RAM.
tr0: Hardware address : 00:20:35:C0:8D:E8
tr0: Maximum MTU 16Mbps: 4056, 4Mbps: 4568
tr0: port 0xa20, irq 9, mmio 0xd0000, sram 0xd4000,
  hwaddr=002035C08DE8
nfsd_init: initialized fhcache, entries=256
tr0: Initial interrupt : 16 Mbps, shared RAM base 000d4000.
tr0: Adapter initialized and opened.